255/40R19 vs 225/40R20

225/40R20 is 0.06 in (1.4 mm) taller than 255/40R19, a +0.20% diameter difference. With the speedometer set for 255/40R19, an indicated 60 mph is 60.1 mph on 225/40R20.

Is this a safe swap?

Diameter difference +0.20%: under 1%

By overall diameter alone, 225/40R20 is a near match for 255/40R19; the speedometer changes by less than 1%. This check uses diameter only. It does not assess load index, speed rating, wheel width or clearance.

Side profile and tread width, drawn to the same scale.

255/40R19 vs 225/40R20 differences
Measurement	255/40R19	225/40R20	Difference	% diff
Overall diameter	27.03 in (686.6 mm)	27.09 in (688.0 mm)	+0.06 in (+1.4 mm)	+0.20%
Sidewall height	4.02 in (102.0 mm)	3.54 in (90.0 mm)	−0.47 in (−12.0 mm)	−11.76%
Section width	10.04 in (255.0 mm)	8.86 in (225.0 mm)	−1.18 in (−30.0 mm)	−11.76%
Circumference	84.92 in (2,157.0 mm)	85.10 in (2,161.4 mm)	+0.17 in (+4.4 mm)	+0.20%
Revolutions per mile	746	745	−2	−0.20%

True speed with the speedometer calibrated for 255/40R19
Indicated	Actual on 255/40R19	Actual on 225/40R20	Difference
30 mph	30.0 mph	30.1 mph	+0.1 mph
60 mph	60.0 mph	60.1 mph	+0.1 mph
75 mph	75.0 mph	75.2 mph	+0.2 mph

Ride-height change: 225/40R20 raises the vehicle by 0.03 in (0.7 mm) at the axle (half the +1.4 mm diameter difference).

225/40R20 is 0.06 in taller than 255/40R19 and 30 mm narrower, a 0.20% difference in overall diameter.

With the speedometer calibrated for 255/40R19, an indicated 60 mph is actually 60.1 mph on 225/40R20, and revolutions per mile change from 746 to 745.

225/40R20 mounts on a 20-inch wheel, a plus-1 fitment from the 19-inch wheel of 255/40R19.

Size pages

Other comparisons with 255/40R19

Other comparisons with 225/40R20

Source: Calculated from standard tire geometry formulas. Verified 2026-09-27. How these numbers are calculated.