285/40R22 vs 295/40R22

295/40R22 is 0.31 in (8.0 mm) taller than 285/40R22, a +1.02% diameter difference. With the speedometer set for 285/40R22, an indicated 60 mph is 60.6 mph on 295/40R22.

Is this a safe swap?

Diameter difference +1.02%: within the ±3% guideline

By overall diameter alone, 295/40R22 falls inside the ±3% range commonly used as a guideline when replacing 285/40R22. This check uses diameter only. It does not assess load index, speed rating, wheel width or clearance.

Side profile and tread width, drawn to the same scale.

285/40R22 vs 295/40R22 differences
Measurement	285/40R22	295/40R22	Difference	% diff
Overall diameter	30.98 in (786.8 mm)	31.29 in (794.8 mm)	+0.31 in (+8.0 mm)	+1.02%
Sidewall height	4.49 in (114.0 mm)	4.65 in (118.0 mm)	+0.16 in (+4.0 mm)	+3.51%
Section width	11.22 in (285.0 mm)	11.61 in (295.0 mm)	+0.39 in (+10.0 mm)	+3.51%
Circumference	97.32 in (2,471.8 mm)	98.30 in (2,496.9 mm)	+0.99 in (+25.1 mm)	+1.02%
Revolutions per mile	651	645	−7	−1.01%

True speed with the speedometer calibrated for 285/40R22
Indicated	Actual on 285/40R22	Actual on 295/40R22	Difference
30 mph	30.0 mph	30.3 mph	+0.3 mph
60 mph	60.0 mph	60.6 mph	+0.6 mph
75 mph	75.0 mph	75.8 mph	+0.8 mph

Ride-height change: 295/40R22 raises the vehicle by 0.16 in (4.0 mm) at the axle (half the +8.0 mm diameter difference).

295/40R22 is 0.31 in taller than 285/40R22 and 10 mm wider, a 1.02% difference in overall diameter.

With the speedometer calibrated for 285/40R22, an indicated 60 mph is actually 60.6 mph on 295/40R22, and revolutions per mile change from 651 to 645.

Both sizes mount on 22-inch wheels.

Size pages

Other comparisons with 285/40R22

Other comparisons with 295/40R22

Source: Calculated from standard tire geometry formulas. Verified 2026-09-27. How these numbers are calculated.