295/30R20 vs 295/35R20

295/35R20 is 1.16 in (29.5 mm) taller than 295/30R20, a +4.31% diameter difference. With the speedometer set for 295/30R20, an indicated 60 mph is 62.6 mph on 295/35R20.

Is this a safe swap?

Diameter difference +4.31%: outside the ±3% guideline

By overall diameter alone, 295/35R20 falls outside the ±3% range commonly used as a guideline when replacing 295/30R20; speedometer and ride-height changes are larger. This check uses diameter only. It does not assess load index, speed rating, wheel width or clearance.

Side profile and tread width, drawn to the same scale.

295/30R20 vs 295/35R20 differences
Measurement	295/30R20	295/35R20	Difference	% diff
Overall diameter	26.97 in (685.0 mm)	28.13 in (714.5 mm)	+1.16 in (+29.5 mm)	+4.31%
Sidewall height	3.48 in (88.5 mm)	4.06 in (103.3 mm)	+0.58 in (+14.8 mm)	+16.67%
Section width	11.61 in (295.0 mm)	11.61 in (295.0 mm)	0.00 in (0.0 mm)	0.00%
Circumference	84.72 in (2,152.0 mm)	88.37 in (2,244.7 mm)	+3.65 in (+92.7 mm)	+4.31%
Revolutions per mile	748	717	−31	−4.13%

True speed with the speedometer calibrated for 295/30R20
Indicated	Actual on 295/30R20	Actual on 295/35R20	Difference
30 mph	30.0 mph	31.3 mph	+1.3 mph
60 mph	60.0 mph	62.6 mph	+2.6 mph
75 mph	75.0 mph	78.2 mph	+3.2 mph

Ride-height change: 295/35R20 raises the vehicle by 0.58 in (14.8 mm) at the axle (half the +29.5 mm diameter difference).

295/35R20 is 1.16 in taller than 295/30R20 and the same width, a 4.31% difference in overall diameter.

With the speedometer calibrated for 295/30R20, an indicated 60 mph is actually 62.6 mph on 295/35R20, and revolutions per mile change from 748 to 717.

Both sizes mount on 20-inch wheels.

Size pages

Other comparisons with 295/30R20

Other comparisons with 295/35R20

Source: Calculated from standard tire geometry formulas. Verified 2026-09-27. How these numbers are calculated.