325/45R22 vs 35x12.50R24

35x12.50R24 is 1.48 in (37.7 mm) taller than 325/45R22, a +4.43% diameter difference. With the speedometer set for 325/45R22, an indicated 60 mph is 62.7 mph on 35x12.50R24.

Is this a safe swap?

Diameter difference +4.43%: outside the ±3% guideline

By overall diameter alone, 35x12.50R24 falls outside the ±3% range commonly used as a guideline when replacing 325/45R22; speedometer and ride-height changes are larger. This check uses diameter only. It does not assess load index, speed rating, wheel width or clearance.

Side profile and tread width, drawn to the same scale.

325/45R22 vs 35x12.50R24 differences
Measurement	325/45R22	35x12.50R24	Difference	% diff
Overall diameter	33.52 in (851.3 mm)	35.00 in (889.0 mm)	+1.48 in (+37.7 mm)	+4.43%
Sidewall height	5.76 in (146.3 mm)	5.50 in (139.7 mm)	−0.26 in (−6.6 mm)	−4.48%
Section width	12.80 in (325.0 mm)	12.50 in (317.5 mm)	−0.30 in (−7.5 mm)	−2.31%
Circumference	105.29 in (2,674.4 mm)	109.96 in (2,792.9 mm)	+4.66 in (+118.4 mm)	+4.43%
Revolutions per mile	602	576	−26	−4.24%

True speed with the speedometer calibrated for 325/45R22
Indicated	Actual on 325/45R22	Actual on 35x12.50R24	Difference
30 mph	30.0 mph	31.3 mph	+1.3 mph
60 mph	60.0 mph	62.7 mph	+2.7 mph
75 mph	75.0 mph	78.3 mph	+3.3 mph

Ride-height change: 35x12.50R24 raises the vehicle by 0.74 in (18.8 mm) at the axle (half the +37.7 mm diameter difference).

35x12.50R24 is 1.48 in taller than 325/45R22 and 8 mm narrower, a 4.43% difference in overall diameter.

With the speedometer calibrated for 325/45R22, an indicated 60 mph is actually 62.7 mph on 35x12.50R24, and revolutions per mile change from 602 to 576.

35x12.50R24 mounts on a 24-inch wheel, a plus-2 fitment from the 22-inch wheel of 325/45R22.

Size pages

Other comparisons with 325/45R22

Other comparisons with 35x12.50R24

Source: Calculated from standard tire geometry formulas. Verified 2026-09-27. How these numbers are calculated.