35x12.50R15 vs 285/75R17

285/75R17 is 1.17 in (29.7 mm) shorter than 35x12.50R15, a −3.34% diameter difference. With the speedometer set for 35x12.50R15, an indicated 60 mph is 58.0 mph on 285/75R17.

Is this a safe swap?

Diameter difference −3.34%: outside the ±3% guideline

By overall diameter alone, 285/75R17 falls outside the ±3% range commonly used as a guideline when replacing 35x12.50R15; speedometer and ride-height changes are larger. This check uses diameter only. It does not assess load index, speed rating, wheel width or clearance.

To-scale drawing: 35x12.50R15 (35.00 in) vs 285/75R17 (33.83 in)35x12.50R1535.00 in × 12.50 in285/75R1733.83 in × 11.22 in
Side profile and tread width, drawn to the same scale.
35x12.50R15 vs 285/75R17 differences
Measurement35x12.50R15285/75R17Difference% diff
Overall diameter35.00 in (889.0 mm)33.83 in (859.3 mm)−1.17 in (−29.7 mm)−3.34%
Sidewall height10.00 in (254.0 mm)8.42 in (213.8 mm)−1.58 in (−40.2 mm)−15.85%
Section width12.50 in (317.5 mm)11.22 in (285.0 mm)−1.28 in (−32.5 mm)−10.24%
Circumference109.96 in (2,792.9 mm)106.28 in (2,699.6 mm)−3.67 in (−93.3 mm)−3.34%
Revolutions per mile576596+20+3.46%
True speed with the speedometer calibrated for 35x12.50R15
IndicatedActual on 35x12.50R15Actual on 285/75R17Difference
30 mph30.0 mph29.0 mph−1.0 mph
60 mph60.0 mph58.0 mph−2.0 mph
75 mph75.0 mph72.5 mph−2.5 mph

Ride-height change: 285/75R17 lowers the vehicle by 0.58 in (14.9 mm) at the axle (half the −29.7 mm diameter difference).

285/75R17 is 1.17 in shorter than 35x12.50R15 and 33 mm narrower, a 3.34% difference in overall diameter.

With the speedometer calibrated for 35x12.50R15, an indicated 60 mph is actually 58.0 mph on 285/75R17, and revolutions per mile change from 576 to 596.

285/75R17 mounts on a 17-inch wheel, a plus-2 fitment from the 15-inch wheel of 35x12.50R15.

Size pages

Other comparisons with 35x12.50R15

Other comparisons with 285/75R17

Source: Calculated from standard tire geometry formulas. Verified . How these numbers are calculated.