325/60R20 vs 37x13.50R22

37x13.50R22 is 1.65 in (41.8 mm) taller than 325/60R20, a +4.65% diameter difference. With the speedometer set for 325/60R20, an indicated 60 mph is 62.8 mph on 37x13.50R22.

Is this a safe swap?

Diameter difference +4.65%: outside the ±3% guideline

By overall diameter alone, 37x13.50R22 falls outside the ±3% range commonly used as a guideline when replacing 325/60R20; speedometer and ride-height changes are larger. This check uses diameter only. It does not assess load index, speed rating, wheel width or clearance.

Side profile and tread width, drawn to the same scale.

325/60R20 vs 37x13.50R22 differences
Measurement	325/60R20	37x13.50R22	Difference	% diff
Overall diameter	35.35 in (898.0 mm)	37.00 in (939.8 mm)	+1.65 in (+41.8 mm)	+4.65%
Sidewall height	7.68 in (195.0 mm)	7.50 in (190.5 mm)	−0.18 in (−4.5 mm)	−2.31%
Section width	12.80 in (325.0 mm)	13.50 in (342.9 mm)	+0.70 in (+17.9 mm)	+5.51%
Circumference	111.07 in (2,821.2 mm)	116.24 in (2,952.5 mm)	+5.17 in (+131.3 mm)	+4.65%
Revolutions per mile	570	545	−25	−4.45%

True speed with the speedometer calibrated for 325/60R20
Indicated	Actual on 325/60R20	Actual on 37x13.50R22	Difference
30 mph	30.0 mph	31.4 mph	+1.4 mph
60 mph	60.0 mph	62.8 mph	+2.8 mph
75 mph	75.0 mph	78.5 mph	+3.5 mph

Ride-height change: 37x13.50R22 raises the vehicle by 0.82 in (20.9 mm) at the axle (half the +41.8 mm diameter difference).

37x13.50R22 is 1.65 in taller than 325/60R20 and 18 mm wider, a 4.65% difference in overall diameter.

With the speedometer calibrated for 325/60R20, an indicated 60 mph is actually 62.8 mph on 37x13.50R22, and revolutions per mile change from 570 to 545.

37x13.50R22 mounts on a 22-inch wheel, a plus-2 fitment from the 20-inch wheel of 325/60R20.

Size pages

Other comparisons with 325/60R20

Other comparisons with 37x13.50R22

Source: Calculated from standard tire geometry formulas. Verified 2026-09-27. How these numbers are calculated.